Showing posts with label wheels. Show all posts
Showing posts with label wheels. Show all posts

Saturday, April 19, 2014

Ask Joe Mechanic - Exterior Vehicle Maintenance


Last week we covered the things we should do to our vehicles to get them cleaned up from this brutal winter. In addition to the basic tips given last week, there is more you can do to help clean, protect and prolong the appearance of your vehicle. I will mention a few product names in this column, this is not a recommendation for you to purchase these products, only a statement that I personally have had good results from them. There are many fine car care products on the market and everyone has their own personal preferences. The only thing that I definitely recommend is that you research and purchase a quality product, as often buying a cheaper product may not yield the same results and could even adversely affect the finish on your vehicle.


            TIRES - it is always a good idea at the change of seasons to put a little extra work into cleaning up your tires with a good tire and whitewall cleaner. After cleaning, a good application of a tire protectant/tire shine does much to help renew the rubber and improve the appearance of your tires.


            WHEELS - it is recommended to thoroughly clean your wheels, especially if you have alloy wheels. Brake dust is very abrasive and corrosive, and can completely ruin the finish of expensive alloy wheels. There are quality wheel cleaning products on the market such as Wheel Brite, which do an effective job under normal conditions. If you wheels are extremely coated with brake dust of other corrosives, it may be necessary to seek out a professional detailer to have them use an industrial strength wheel acid.


            WINDOWS AND WIPERS - clean your windows and your wiper blades with an ammonia-based window cleaner.  Cleaning the wiper blades also removes any salt residue from the blades and will help to keep them soft and pliant. After a thorough cleaning, an application of a product such as RainX will really help your visibility in wet weather.  It appears we are going to see a lot of rain this spring!


            PAINT- after a through washing, on a nice afternoon, find a shady spot and give your car a coating of a quality wax. My personal preference is Meguiars products, however use whatever brand you prefer, but be sure it is a product suited for the type finish on your vehicle. I like to use a carnauba-based wax, but there are many types available. I recommend apply the wax in the shade for a few reasons. First of all, it slows the drying process of the wax.  Wax will set up very quickly on a hot paint finish, and a dark car on a hot sunny day can become very hot. Also, doing a wax job and buffing it out properly requires some serious physical effort.  If you are like me, I can spend a couple hours doing this so being in the shade is also for your own comfort. And, make sure you have some of your favorite beverage of choice so you do not dehydrate while you work.

           

If you complete these car care tasks on a semi-annual basis, you will add years to your vehicle’s good looks.


Thursday, November 21, 2013

Enjoy the Drive!

Each week we will bring you a variety of content on the new Auto Locator blog!  You will find tips, trends, tidbits and news that are relevant to the automotive industry.  Additionally, we will publish the column, "Ask Joe Mechanic," that appears in the weekly print version of Auto Locator from the previous week.  

If you have topics and ideas that you would like to see covered in our weekly posts, please let us know.  Either by commenting on this blog or by emailing us at info@auto-locator.com.  Your feedback and participation with this blog is important to us and we desire to offer you the material that is important and relevant to your automobile shopping, vehicle care and any other aspect of automobile ownership or leasing.  

You'll note that a LOT of content was posted to the blog in the past few days, if you have been following our posts.  What you'll find in these recent posts are all of the back-issue columns of "Ask Joe Mechanic."  Any column that has run since the creation of this weekly feature of Auto Locator is now available for your online reading pleasure.  If you have any questions for the author of the column, please post them or contact "Joe" by email. 

We look forward to riding the road together, with you the reader, as we build this new blog in the weeks and months to come.  

Thank you for your continued support of Auto Locator, we appreciate your loyalty and patronage!

Ask Joe Mechanic: Expensive Driving Habits

Everyone has bad habits, it is just our nature. Some are harmless such as biting one’s fingernails, but others can be quite harmful, such as smoking. But we also have habits when it comes to driving, and some of them can be harmful to our vehicles and costly to our wallets. Here are a few bad habits that if corrected, can add miles to your vehicle life and put dollars in your vehicle expense account.

Running on empty. Fuel costs are still high, even though they have dropped recently, and many of us try to get every last mile out of a tank full. While it may feel good to get an extra day or two out of that last fill up, the toll that it takes on your car can be a large one. The sediment in gasoline settles to the bottom of your tank, and when your gas runs low, the car must use this dirtiest gas as its fuel. As that happens, this sediment gets stirred up and
drawn into the fuel system. Yes, your fuel filter is designed to catch this, but some very small particles will slip through. What does slip through will get into your injectors and start to block the tips. Also, your fuel filter is now getting blocked with this junk, meaning you will need to replace your filter sooner than normal. Another thing to consider is that in winter, moisture will condense from the air in the tank and this can freeze up your fuel line on a cold
morning.

Jack-rabbit starts and hard braking. For some drivers, especially those living or working in cities, stop and start driving is a fact of life. For others, the way they stop and start puts a lot of unnecessary stress on their vehicles. Drivers who enjoy accelerating and then stopping quickly between lights may like the adrenaline rush it provides, but their vehicles do not like it. Neither does their wallet. Frequently flooring the vehicle first of all wastes expensive fuel and also puts a heavy strain in the motor. And all that heavy braking puts a lot of excess wear on the vehicle’s braking system, prematurely wearing the pads and possibly warping the brake rotors. Instead of the hard starts and stops, smoothly accelerate and anticipate
stopping. Your engine, brakes and your wallet will appreciate it.

Revving your engine. Fans of the film franchise “The Fast and the Furious” may love to rev their engines just like their favorite movie stars. But in real life, such actions are pointless and potentially very harmful to their vehicle. This is especially true when a vehicle has just been started and the engine is still cold. Revving the engine while still cold means the engine oil has not been properly circulated throughout the engine and this can result in
serious premature engine wear. If continually done, you will end up either with a very expensive repair bill for your engine or a bill to replace it with another one. 


Another thing to consider with all the  turbocharged and supercharged engines on the market is the stress and wear this puts on those parts. Most turbocharger manufacturers recommend about a minute warm up, especially in cold weather, before putting the car in gear and pulling out.  Additionally recommended from these manufacturers is that after any sustained  run, give the engine about 30 seconds at  idle before shutting of the ignition to allow the turbocharger to cool slightly and give it fresh lubrication.

Remembering these few simple tips can add miles to your vehicle’s life and save  you significantly at the gas pump.

This week’s recalls:
344,187 2007-2008 Honda Odysseys:

Due to a combination of system
components and software, the Vehicle
Safety Assist System (VSA) may apply the
brakes unexpectedly. Result: The vehicle
may suddenly and unexpectedly brake
hard, and without illuminating the brake
lights, increasing the risk of a crash from
behind.

2,618 2012-2014 Ford Focus Electric
Because of potential loss of power to
the wheels while driving, caused by
software anomalies associated with the
power control module and is accompanied
by a “Stop Safely Now” warning in the
instrument cluster.

176,000 2012-2014 BMW 320i, 328i, 320i
xDrive and 328i xDrive Sedans, as well
as the 2014 328i xDrive Sports Wagon;
2012 and 2013 528i and 528i xDrive
Sedans; 2013-14 X1 sDrive28i and X1
xDrive28i vehicles; and 2012-14 X4
sDrive28i Roadsters
. 

Models involved in the recall all have turbocharged four-
cylinder, 2-liter gasoline engines. Because
of insufficient lubrication to a vacuum
pump, it can lose the power assistance in
braking. The driver can still stop the car in
the event of a loss of power braking, but it
will take more force on the brake pedal.


Wednesday, November 20, 2013

Ask Joe Mechanic: Tires

This week we will discuss tires. A good policy that I follow is every time I am filling my gas tank; I do a walk around my car and among the things that I look at are all my tires. I do this to see any apparent problems like a tire noticeably low on air or a damaged tire or wheel.

A good policy to follow as far as tire preventive maintenance is every 1000 miles do a more thorough check of the tires and wheels. For the average driver, this means about once a month, and if you drive much more than the average, you really need to check them more often. Check your tire pressures first of all. You should always inflate your tires to the vehicle manufacturer’s recommendations for your type of usage. Most vehicles have a label either on the driver’s door or door jamb, if not, the information is in the owners manual.

Do not just go by the maximum pressure marked on the tire sidewall, as this may not be suitable for your vehicle. A tire that is a few pounds low on air pressure can cost you 2 to 3 mpg, and at $3.50 per gallon, nobody wants to waste gasoline. When you are checking your air pressure, look for signs of abnormal tire wear. A tire that is worn on just the inside or outside edge is usually a sign of an alignment problem.

If the tires are worn on both the inside and outside edges, this is usually a sign they have been run underinflated. If the
center of the tire is worn down with good tread on the edges, this is a sign of either the tires being overinflated or having tires that are too wide for the wheels on the vehicle. This is something seen most commonly on 4x4s. Another sign of a problem is a bent rim.  Examine the rim and the sidewall of the tire because damage from hitting a curb or a pothole can cause alignment problems in addition to a tire belt separation.

A belt separation can be noticed by an area of the tread, which is worn down much more than the surrounding area or a bulge in the sidewall of the tire. Another sign of this type of a problem can be a shaking through the steering wheel, although this can also indicate a wheel balance problem.  One thing many people do not think about is the age of their tires. Most people think that if their tires have good tread, they are perfectly safe, unfortunately, that is a dangerous myth.

Someone who drives only a few thousand miles a year can actually have tires more dangerous than someone’s whose are almost worn out. Tires can develop age cracks either in the tread or the sidewall, and these tires can blow out, especially during times of very hot weather, heavy loading, or if you strike a road hazard.  Most newer tires are date coded, but a good visual inspection is usually enough to know you are safe.

As far as tread depth, the old adage is to take a penny, stick the top of “Abe’s” head into the tread groove, and if you do not see the top of his head, your tires are of safe tread depth. Tire safety is a place where using a little common sense can make your car much safer.

Recent recalls:
193,936 Vehicles
2006-2011 Suzuki Grand Vitara &
2007-2011 Suzuki SX4
For a defective passenger seat air bag sensor which if it fails could deploy the air bags.

861 Indian Motorcycles models
2009 Deluxe & Standard
2009-2011 Roadmaster
2009-2013 Vintage
2010-2013 Classic & Darkhorse
2010 Bomber &
2011 Blackhawk & Blackhawk Dark
Rear wheel may crack and cause sudden lose of air pressure and could result in a crash.

13,709 Polaris Victory Motorcycles
models 2010-2013 Victory Crossroads.
Cross Country, Cross Country Tour &
Hardball
With combination Lock & Ride accessory backrest with luggage rack, backrest can fail.

89,527 Child safety seats,
certain Safety 1st Complete,
Safety First Alpha Omega Elite, & Eddie
Bauer 3-in-1 Convertible seats
Have improperly labeled and vague mounting instructions.

If you think you are affected by any of these recalls, contact your dealer or the manufacturer for further instructions.